EPOXY ALUMINUM PUTTY
General Purposes Aluminum filled epoxy putty
DESCRIPTION
Epoxy Aluminum Putty is a two components compound
provides excellent adhesion strength to Aluminum but
also to most metals and concrete.
Epoxy Aluminum Putty provides excellent resistance
to oil, water and many chemicals.
APPLICATION
Epoxy
Aluminum Putty is recommended for use in repairing
cracks and breaks in castings, machinery etc. made
of aluminum and those required non-rusting finish.
PROPERTIES
UNCURED
BASIS
HARDENER
Viscosity (A and B) *(1) ……………….
Putty 250-350 cps
Specific Gravity @ 250C (gr./cm3)……… 1.75
0.98-1
Mix
Ratio (by weight)
…………………..
100:10
Mix
Viscosity @250C
……………………
14000-25000 cps
Pot
Life (100gr.@250C)
minutes…………
40-50
Shelf
life @ 25-350C (month)…………..
12
12
PROPERTIES CURED
Hardness,
ASTM-D-2240 (durometer)………………… 80-84 Shore D
Tensile
Strength, ASTM-D-638 (kg/cm2)
……………… 520-570
Compressive Strength ASTM-D-695 (kg/cm2)………….
970-1050
Flexural
Strength, ASTM-D-790 (kg/cm2)
……………. 570-600
Shear
Strength (AL/AL. – kg/cm2)
………………………180 +/- 10
Dielectric Properties ………………………………………NA
MIXING INSTRUCTION
Aluminum putty can be
supplied in two versions
1.A
side and B-side are soft past and the result
is putty
2.A side is soft past and B side is
liquid
Version 1
Epoxy Aluminum (parts A and B) are soft putties easy
to mix. Take equal amounts of A and B, mix
thoroughly, scraping sides and bottom of the
container until uniform consistency is obtained. The
putty is ready for use as an adhesive or filler.
Version 2
Weigh out the required amount of A side, weigh into
10 parts of B side to 100 parts of A side
Mix curing agent in thoroughly, scraping sides and
bottom of the mixing container De-air, if necessary.
Pour into cavity
Printable version |
