EPOXY STEEL PUTTY
General Purposes Steel filled epoxy putty
DESCRIPTION
Epoxy Steel Putty is a two components compound, has
excellent adhesion strength to most metals and
concrete. Epoxy Steel Putty provides excellent
resistance to gasoline, oil, water and many
chemicals.
APPLICATION
Epoxy Steel
Putty is recommended for use in repairing cracks and
breaks in castings, machinery etc.
PROPERTIES
Viscosity (A and B) *(1) ……………….
Putty
Mix Ratio *(1) ………………………… 1:1
Specific
Gravity ……………………… 2.85
Shear
Strength (St/St. – kg/cm2)
…….. 210 +/- 10
Flexural
Strength …………………….. 340
Compressive Strength (kg/cm2) ……….
550
Hardness (Shore D) …………………. 82 +/- 4
Pot Life (min @ 250C) ………………. 45
Dielectric Strength …………………… NA
Shelf Life @ 250C (months)
…....….... 12 min
*(1) Mix ratio 1:1 is when A and B are putties.
A
faster hardener can be supplied in a liquid form
MIXING INSTRUCTION
Epoxy Steel (parts A and B) are soft putties easy
to mix. Take equal amounts of A and B, mix
thoroughly, scraping sides and bottom of the
container until uniform consistency is obtained. The
putty is ready for use as an adhesive or filler.
CURE
A layer of 8 to 12 mm will harden in between 3 to 4
hours at temperature of 250C. A higher
temperature will accelerate the curing time but a
lower temperature will elongate the curing time. The
curing time is also effected by the thickness of the
layer.
Working curing time is 24 hours at 250C.
Printable version |
