EPUSIL EP 501 P
Non-abrasive Casting Epoxy Paste
DESCRIPTION
Epusil EP 501 P is an easy-to-use, epoxy pastes. EP
501 P was designed for vertical coating or filling
paste, preservation of antiquities sculpture etc.
PROPERTIES - UNCURED
PART A
PART B
Color, visual..........................……….Off
white Off white
Viscosity …………………………….Paste
Paste
Specific Gravity (gr/cm3)…..…….…..1.2
1.05
Mix Ratio (weight) ............……….…
100:50
Pot Life @ 250 C (100
gr.)..……….... 90-110
Service Temperature …………………
-20 to 100 0C
Shelf Life (month)
............……............. 12
months min.
PROPERTIES - CURED
Hardness, ASTM-D-2240 (Durometer) ….…. Shore D
78-82
Tensile Strength, ASTM D-638 ………….…. 380 +/- 200
kg/cm2
Tensile Elongation, ASTM D-638 ………….. 3 % - 5 %
Compressive Strength, ASTM D-695
……..… 750 +/- 200 kg/cm2
MIXING INSTRUCTION
1.
Weigh out 50 parts of Part B into 100 parts of Part
A.
2.
Mix thoroughly, scraping both the bottom and sides
of the container.
3.
Apply on the planed surface.
4.
Re-cover both original containers.
CURE SCHDULE
Over night at room temperature (22 – 250C)
Printable version |
